PowerVu Listings Explained November 4, 2026: Read Every Row

PowerVu Listings Explained: Read Every Row Like a Pro

Every day, bulletins list PowerVu channels as one-line rows full of numbers — 12681H, 30000, 3/4, SID 106, V 5409, A 5410. If you cannot decode that line, you cannot tell a new feed from a moved one, a real channel from a duplicate, or a beam you can receive from one you never will. This guide decodes every field, using real verified rows, and closes with the November 4, 2026 status check.

Short version: no new PowerVu rows appeared in the November 4 window. The newest verified PowerVu picture is still the November 2 Telstar 12V refresh, and this article teaches you to read those rows yourself. No keys are published here — none appear in the sources.

Quick answer

A PowerVu listing row answers seven questions: which satellite, which transponder, how the signal is modulated, how it is compressed, how it is encrypted, which programme stream is which, and whether the row is new, changed or gone. The three numbers beginners mix up are SID, V_PID and A_PID — SID identifies the programme service, V_PID carries its picture, A_PID carries its sound. Two rows with the same SID and the same PIDs on two transponders are almost always the same channel simulcast twice, not two different channels.

November 4 bulletin check: no new PowerVu rows

Checked November 4, 2026 at about 2:00 PM PKT (09:00 UTC). The SatBeams "Transponder news 4-Nov-26" bulletin covers seven orbital positions — 36°E, 30°W, 15°W, 14°W, 8°W, 7°W and 5°W — and every row in it is dated 3-Nov-26. Its encryptions are FTA, BISS and Viaccess only; a full-page search for PowerVu returned no match. Telstar 12V's only row in this bulletin is 11044V 5DRAMA, FTA. KingOfSat's "Wednesday 4 November 2026" section was still empty at check time, and its Tuesday 3 November section contains VideoGuard, BulCrypt/Conax, Clear and DVB Scrambling items — again, no PowerVu. So the November 4 window adds zero PowerVu rows, the third quiet window in this run of slots after November 1 and November 3.

Worked example 1: a Telstar 12V row, decoded

From the November 2 bulletin, still the latest PowerVu picture: Telstar 12V 12681H 30000 3/4 8PSK DVB-S2, MTN Worldwide TV — BBC World News, PowerVu, SD, MPEG-4, V 5409, A 5410, SID 106. Read it left to right:

• Telstar 12V, 15°W — the satellite and its orbital slot. The slot matters because it decides which dish direction and which beam footprint apply.
• 12681H — the downlink frequency (12681 MHz) and polarisation (Horizontal). Enter it exactly; 12681V would be a different transponder.
• 30000 — the symbol rate (SR), in symbols per second. Your receiver needs this to lock the transponder at all.
• 3/4 — the FEC (forward error correction) rate. Higher fractions carry more data but tolerate less noise; 3/4 is a common DVB-S2 balance.
• 8PSK, DVB-S2 — the modulation and the broadcast standard. An old DVB-S-only box cannot decode an 8PSK DVB-S2 transponder, however strong the signal.
• MTN Worldwide TV — the package or bouquet operator. PowerVu feeds are usually sold as bouquets, not single channels.
• BBC World News, PowerVu, SD, MPEG-4 — the channel name, the encryption, the resolution and the video codec. MPEG-4 is needed here; an MPEG-2-only box shows nothing.
• V 5409, A 5410, SID 106 — video PID, audio PID and service ID. These three together are the channel's fingerprint inside the transponder.

Worked example 2: an SES 18 row, and why the beam matters

From October 14: SES 18 3930V 15000 3/4 8PSK DVB-S2 — CTV Toronto, PowerVu, HD, MPEG-4, V 2700, A 2710, SID 103. The row decodes exactly the same way — but note the band. 3930V is C-band, so it needs a C-band LNB and a larger dish than a Ku-band feed, and the SES 18 beam is a North America beam. A reader in Pakistan can decode this row perfectly and still never receive it: the footprint does not reach South Asia. That is the single most common disappointment in PowerVu reading — confusing "listed" with "receivable here". Always check the beam name (for example, 15W-Ku-Europe12V on Telstar 12V, or 103W-C-NA18 on SES 18) before planning a dish move.

Field-by-field reference table

Field	What it means	If you get it wrong
Satellite / position	Spacecraft and orbital slot, e.g. Telstar 12V at 15°W	Dish points at the wrong satellite entirely
Frequency + polarisation	Downlink MHz and H/V, e.g. 12681H	No lock; you are tuned to a different transponder
SR (symbol rate)	Transponder speed, e.g. 30000	Receiver cannot lock the transponder
FEC	Error-correction ratio, e.g. 3/4	Marginal signal breaks up or fails to lock
Modulation / standard	QPSK or 8PSK; DVB-S or DVB-S2	Old receiver cannot decode a DVB-S2/8PSK feed
Encryption	PowerVu, PowerVu+, FTA, BISS, etc.	Encrypted picture stays black without authorisation
Resolution / codec	SD/HD and MPEG-2, MPEG-4 or HEVC	Picture decodes as audio-only or not at all
V_PID / A_PID	Video and audio stream IDs inside the transponder	Wrong stream picked; picture without sound or vice versa
SID	Service ID of the programme	Receiver maps the entry to the wrong channel name
Status: new / updated / del	First seen, parameters changed, or removed	Chasing a deleted feed, or missing a moved one

What "new", "updated" and "del" really mean

New means the bulletin saw this row for the first time — but not necessarily that the channel itself is new; it may have moved from another transponder. Updated means something in the row changed: a PID, a SID, a codec, a package. If your saved channel suddenly goes dark, check for an "updated" row with the same name first — a PID change is a five-minute rescan fix. Del means the row disappeared from the transponder. It does not always mean the channel closed; check whether the same SID and PIDs reappeared elsewhere. In the November 4 window, that exact pattern showed up in the non-PowerVu world: KingOfSat records 5 Drama appearing on Telstar 12V 11043V with SID 20256 while 5 Select left the same transponder with the same SID — a rebrand, not a closure.

Spotting duplicates and simulcasts

November 3's Telstar 12V refresh is the textbook case. BBC HD, BBC News, Bloomberg TV, Fox News Channel, Prime One and CNN International Europe appear on both 12681H (MTN) and 12640H (Anuvu) with identical SIDs and PIDs, and BBC News on 12640H shares SID 106 and PIDs 5409/5410 with BBC World News on 12681H. Count rows and you get 43; count distinct services and you get fewer. When you see identical SID/PID fingerprints, treat the rows as one service carried twice — usually a bouquet overlap for different receiving fleets (in this case, maritime and aviation customers) — and do not rescan the same channel twice.

PowerVu vs PowerVu+: one line, do not confuse them

Bulletins distinguish plain PowerVu from PowerVu+. They are related Cisco conditional-access systems, but a receiver or authorisation valid for one is not automatically valid for the other. The October departures illustrate why the distinction matters: SES 21 at 131°W lost a run of PowerVu+ services on October 9 (including Lifetime and Hallmark channels), and Galaxy 18 lost PowerVu+ music services on October 8, while plain PowerVu services on SES 18 were still being added on October 14. If a listing says PowerVu+ and your setup only covers plain PowerVu, that row is not receivable for you, however strong the signal.

Beam honesty: what can a reader in Pakistan actually do with these rows?

Be direct. The active PowerVu picture in late October and early November is dominated by Atlantic and Americas beams: Telstar 12V at 15°W (Europe beam, maritime/aviation fleets), SES 18 at 103°W and SES 21 at 131°W (North America beams), Galaxy 19 at 97°W (North America beam, Ici RDI added October 12). None of these is a South Asia beam, and none is aimed at home dishes in Pakistan. The honest uses of these rows for a Pakistan-based reader are: understanding how professional bouquets work, recognising a feed when it appears on a satellite you can receive, and avoiding wasted dish moves and "key" scams. Any site offering a working key for the MTN or Anuvu PowerVu bouquets today is selling something the bulletins do not contain — this blog publishes no keys, and none appear in the sources for this article.

Receiver checklist before you chase any PowerVu row

• DVB-S2 tuner with 8PSK support — mandatory for the Telstar 12V and SES 18 rows above.
• MPEG-4 (and HEVC for newer feeds) decoding — an MPEG-2-only box will not show these channels.
• C-band capability and a suitably large dish if the row is C-band (SES 18, SES 21, Galaxy 19); Ku-band gear alone is not enough.
• A legitimate authorisation route for the bouquet — PowerVu is a professional conditional-access system. Without authorisation from the bouquet operator, an encrypted row stays black no matter how perfect the signal.
• A blind-scan habit: after any "updated" row for a channel you watch, rescan that transponder before assuming the feed died.

Frequently asked questions

What is the difference between SID, V_PID and A_PID?

SID names the programme service; V_PID is its video stream; A_PID is its audio stream. Together they are the fingerprint that lets your receiver find the right picture and sound inside a transponder carrying many channels.

Why does the same channel appear twice in one bulletin?

Usually a simulcast: the same service carried on two transponders or in two bouquets, often for different customer fleets. Identical SID and PIDs confirm it is one service, not two channels.

Does "new" mean a brand-new channel launched?

Not necessarily. It means the bulletin saw the row for the first time. The channel may have moved transponders, changed packages, or returned after a break.

Did anything PowerVu change on November 4, 2026?

No. The SatBeams November 4 bulletin (rows dated November 3) contains zero PowerVu rows, and KingOfSat's November 4 section was empty at check time. The latest verified PowerVu picture remains the November 2 Telstar 12V refresh.

Is there a PowerVu key for the MTN bouquet today?

No key appears in any source checked for this article, and this blog does not publish keys. PowerVu bouquets are professionally authorised; an encrypted row without authorisation stays black.

Where can I verify these rows myself?

SatBeams transponder-news bulletins and KingOfSat's most-recent-updates page, both linked under Sources below. Compare the SID and PID fingerprints, not just the channel names.

📚 Related Posts

• 1BissKey New Look October 2026: Receiver Guide
• Satellite Updates October 11, 2026: OSN on Badr 8
• Telstar 12V PowerVu Update November 3, 2026: 43 Feeds
• PowerVu Black Screen Fix November 2, 2026: Why Feeds Go Dark
• PowerVu Explained November 1, 2026: Feeds, Receivers, Status
• BISS Key Daily Update November 4, 2026: 30 Verified Records
• Global Satellite Channels November 4, 2026: World Digest
• PowerVu Status October 31, 2026

Sources

• SatBeams — Transponder news 4-Nov-26 (published November 3, 2026, updated November 4, 2026): https://www.satbeams.com/news/transponder-news-4-nov-26
• KingOfSat — Most recent updates (Wednesday 4 November 2026 section empty; Tuesday 3 November 2026 section): https://en.kingofsat.net/news.php
• SatBeams — Transponder news 2-Nov-26 (Telstar 12V 43 PowerVu rows): https://www.satbeams.com/news/transponder-news-2-nov-26
• SatBeams — Transponder news 14-Oct-26 (SES 18 PowerVu additions): https://www.satbeams.com/news/transponder-news-14-oct-26
• SatBeams — Transponder news 9-Oct-26 (SES 21 PowerVu+ departures): https://www.satbeams.com/news/transponder-news-9-oct-26
• SatBeams — Transponder news 12-Oct-26 (Galaxy 19 Ici RDI PowerVu): https://www.satbeams.com/news/transponder-news-12-oct-26
• SatBeams — Transponder news 8-Oct-26 (Galaxy 18 PowerVu+ departures): https://www.satbeams.com/news/transponder-news-8-oct-26

Disclaimer: Frequencies, PIDs and SIDs change without notice. Verify a row in the live bulletins before moving a dish or rescanning. This article publishes no keys and no authorisation codes; PowerVu bouquets require legitimate authorisation from the bouquet operator.