Dish Receiver Updates Nov 2, 2026: STARSAT U43 Zoom v1820

Dish Receiver Updates November 2, 2026: STARSAT U43 Zoom v1820

One genuinely new receiver file surfaced today — the STARSAT U43 S2 Zoom Signal software, version 1820, updated on November 2, 2026. It is a different box from yesterday's ME200628 walkthrough, on different hardware, so check the identifiers below before you touch a USB stick.

Welcome to the 1BissKey daily receiver update for November 2, 2026. We swept the MAST Dish Info Layyah firmware pages, the Dish Download listings and the current satellite-news items on November 2. The new item is the STARSAT U43 S2 HW203.00.001 software, version 1820, whose MAST page was published and updated on November 2, 2026. Everything else in this post is clearly marked as still-current or background — not dressed up as new. No BISS or PowerVu key values appear anywhere in this article.

Quick Summary — November 2, 2026

New today (Nov 2)	STARSAT U43 S2 HW203.00.001 Zoom Signal Software 2026, version 1820 (GX6605S chipset), MAST page published and updated November 2, 2026.
Still current	STARSAT SR-5020HD V3.83 guide (V3.80 recommended for stability); Tiger trio of October 23; Enigma2 OpenTS 12.6 / BlackHole 13.6 (October 26).
Rescan note	Paksat MM1 at 38.2E gained 12 channels in the November 1 update — a rescan, not a reflash, is the fix if those channels are missing.
Keys in this post	None. No BISS or PowerVu key values appear anywhere in this article.

New Today: STARSAT U43 S2 v1820 Zoom Signal Software

The new release is listed by MAST Dish Info Layyah as "STARSAT U43 S2 HW203.00.001 New Zoom Signal Software 2026", customized by MAST Dish Info Layyah. Its page shows a publication date of November 2, 2026 and an update the same day — the date evidence that makes this today's item rather than a refreshed archive page. The headline feature is the new Zoom Signal display, showing signal (S), quality (Q) and BER (B) in big digits, which is genuinely useful when you are aligning a dish or checking a weak transponder: you can read the numbers from across the room instead of squinting at a small bar.

Identifiers and features exactly as listed for this release:

• Model: STARSAT U43 S2
• Hardware: HW203.00.001 — note the .001 ending. This is NOT yesterday's HW203.00.017 box (ME200628-BLACK). The two hardware versions take different files.
• Software version: 1820
• Chipset: GX6605S
• Signal display: New Zoom Signal (S, Q and B) with big digits
• Satellites added: 84 satellites in the list
• Tested channel shown: PTV Sports HD
• Network features listed: Wi-Fi, DLNA and E-Cast
• Apps mentioned in the companion video: TikTok and YouTube, plus multiple IPTV apps including Xtream

Do not confuse .001 with .017

This is the most important warning in today's post. Yesterday's receiver article covered a two-step procedure for the ME200628-BLACK on HW203.00.017. Today's file is for the STARSAT U43 S2 on HW203.00.001. Both sit in the GX6605S / HW203 family, both carry a "2026" series label, and both mention PTV Sports — but the hardware version is different, and firmware is matched to hardware, not to family resemblance. Open Menu > System Info on your own box and read the hardware version character for character. If it does not read HW203.00.001, today's v1820 file is not for your box, however similar the model name looks.

Safe USB steps (general procedure)

• Confirm model STARSAT U43 S2 and hardware HW203.00.001 first. If either differs, stop.
• Back up your channel list to USB and photograph your current version screen before upgrading.
• Use only the creator's own MAST page for the file. This article hosts no download file and vouches for no mirror.
• Do not power off during the USB upgrade, and do not interrupt the restart that follows it.
• After the upgrade, check the Zoom Signal display on a known-good channel and confirm PTV Sports HD and your regular channels still scan and play before changing any other setting.

Still Current: STARSAT SR-5020HD — V3.83 Is Latest, V3.80 Is the Safe Pick

The SR-5020HD guide lists V3.83_14042026 as the latest version, followed by V3.82 (March 2026) and V3.80 (March 2026). Note the file-date pattern: V3.83 is an April 2026 build, not a November release, so it is reported here as the current latest — not as today's news. The guide's own practical advice is worth repeating: do not automatically install the latest version. It reports cases where V3.83 worked perfectly and others where users downgraded to V3.80 for better stability, and it recommends starting with V3.80, then testing V3.83 only if you want the newest improvements. The box supports Ku-band and C-band satellites and DiSEqC 1.0 / 1.1 / 1.2 / USALS. If your SR-5020HD already runs V3.80 stably, nothing in today's sweep gives you a reason to move.

Rescan First: Paksat MM1 Added 12 Channels

A November 1 update reports 12 new channels added on Paksat MM1 at 38.2E. If you point at Paksat and some of those channels are missing, the correct first step is a blind or network rescan of 38.2E — not a firmware flash. Firmware changes how the box behaves; a rescan updates what it knows is on the satellite. Check the dish and signal readings first, rescan, and only consider software if the box itself is misbehaving (menus, signal display, or playback faults), not merely because a channel list is out of date.

In the Background: Tiger Trio, Enigma2, and a NavIC Watch Item

Tiger / Dish Download. The Editor Picks still top out at the October 23 trio — TIGER T66 FOREVER V1, RED TIGER T22 FOREVER and RED TIGER T22 VIP — covered on October 23. That is now ten days without a newer headline pick.

Enigma2. No new image surfaced in this sweep. The newest images remain OpenTS 12.6 and BlackHole 13.6, both dated October 26, as reported on November 1. If your Dreambox or Vu+ box already runs one of them, nothing today justifies a reflash.

NavIC NVS-03 (watch item, not a receiver update). ISRO's GSLV-F18 launched the NVS-03 navigation satellite on October 30, 2026, restoring NavIC to its minimum four-satellite configuration, with an L1 signal that mainstream GPS-style receivers already listen to in principle. That does not mean any satellite TV receiver or phone you own supports NavIC L1 today — no chipset vendor with shipped support was named in the sources reviewed, and support depends on chip and handset firmware. Treat it as something to watch for future receiver and device announcements, not as a feature to go looking for in a menu tonight.

Frequently Asked Questions

Is the STARSAT U43 S2 v1820 software new?

Yes, by page date: the MAST page for this release was published and updated on November 2, 2026, with software version 1820 for hardware HW203.00.001. That dated evidence is what separates it from refreshed archive pages.

Can I use v1820 on my HW203.00.017 box?

No — not on the evidence here. v1820 is listed for HW203.00.001. Yesterday's ME200628-BLACK procedure is the .017 item. Match hardware exactly, or do not flash.

What does the Zoom Signal display show?

Signal (S), quality (Q) and BER (B) in big digits, so signal readings are readable from a distance while aligning a dish or checking a weak transponder.

Should I install SR-5020HD V3.83 or V3.80?

The guide lists V3.83 as latest but recommends starting with V3.80 for stability, then testing V3.83 only if you want the newest improvements. If V3.80 already runs stably on your box, stay on it.

Paksat channels are missing — should I flash my receiver?

No, not first. Check signal and dish alignment, then rescan Paksat MM1 at 38.2E, which added 12 channels on November 1. Flash only for box behaviour faults, not for a stale channel list.

Does the NVS-03 launch give my receiver NavIC support?

No. The satellite now transmits an L1 signal, but device support depends on chipset and firmware that no reviewed source names as shipped. It is a watch item, not a menu feature.

📚 Related Posts

• 1BissKey New Look October 2026 — Receiver Updates
• Dish Receiver Updates October 31, 2026: Quiet-Day Guide
• Dish Receiver Updates October 30, 2026: Tools You Own
• Dish Receiver Updates October 29, 2026: SDR Leaves the PC
• Dish Receiver Updates October 28, 2026: OpenATV Code vs Image
• Dish Receiver Updates October 27, 2026: Two New Dreambox Images
• Dish Receiver Updates October 26, 2026: Four Dates, One Release

Sources

• MAST Dish Info Layyah — GX6605S HW203 firmware archive and "STARSAT U43 S2 HW203.00.001 New Zoom Signal Software 2026" page, published and updated November 2, 2026 (model STARSAT U43 S2, hardware HW203.00.001, software version 1820, GX6605S chipset, Zoom Signal S/Q/B big digits, 84 satellites, PTV Sports HD, Wi-Fi / DLNA / E-Cast): https://mastdishinfolayyah.com/gx6605s-hw203-firmware/
• Real4Web — "STARSAT SR-5020HD Software Update (2026 Guide)" (V3.83_14042026 listed latest; V3.80 recommended for stability; Ku/C-band, DiSEqC 1.0/1.1/1.2/USALS): https://real4web.com/en/starsat-sr-5020hd-software-update-2026/
• Dish Download — StarSat T Series / Editor Picks, crawled November 2, 2026 (newest still the October 23 trio: TIGER T66 FOREVER V1, RED TIGER T22 FOREVER, RED TIGER T22 VIP): https://dishdl.com/category/starsat-receiver-new-software-updates/starsat-t-series/?filter_by=popular7
• YouTube — "Paksat MM1 38.2E New Update Today 2026 | 12 New Channels Added" (November 1, 2026 update): https://www.youtube.com/watch?v=q8H5dJyqsE0
• Tech Insider — "NVS-03 Launch: GSLV Lifts NavIC Back to 4 Satellites [2026]" (GSLV-F18, October 30, 2026; L1 signal; no shipped chipset support named): https://tech-insider.org/gslv-f18-nvs-03-orbit-navic-four-satellites-minimum-2026/
• KingOfSat / LyngSat — satellite and channel reference (no new frequency claim is made from them in this article).

Disclaimer: This article reports publicly listed receiver news and creator demonstrations. It provides no firmware download files and no key values. Always match your exact hardware before flashing, back up your channel list first, and flash at your own risk.