FIRMWARE UPDATES • NOVEMBER 2, 2026

StarSat U43 S2 v1820 Out Today: Zoom Signal Update (Nov 2)

A new build landed today, November 2, 2026: the StarSat U43 S2 (HW203.00.001, GX6605S) Zoom Signal software, version 1820, published by MAST Dish Info Layyah. It is a customized third-party build, not an official StarSat release — so the hardware match matters more than usual. Below are the verified details, the current latest versions for other popular models, and the safe-flash checklist.

Illustration only: the signal-meter reading in the graphic is not a measured result. The verified facts are in the article below.

QUICK ANSWER — NOVEMBER 2, 2026

New today: StarSat U43 S2, hardware HW203.00.001, software version 1820 (GX6605S), with the new Zoom Signal display (S, Q & B) with big digits, published November 2, 2026 by MAST Dish Info Layyah. The publisher lists PTV Sports HD, TikTok, YouTube, weather, DLNA, E-Cast and IPTV apps among its features. Important: this is a customized build, not an official StarSat release, and it fits only the exact U43 S2 HW203.00.001 hardware. No new official StarSat, Geant or MediaStar release was confirmed today. StarSat V3.95 was not re-counted today; its last verified figure is the November 1 top-20 total of 6,883 listed downloads.

Today's Release: StarSat U43 S2 v1820

The MAST Dish Info Layyah listing for the GX6605S software was published and updated on November 2, 2026, making this the freshest receiver build in today's check. Its stated details are:

Detail	Listed value
Model	StarSat U43 S2
Hardware	HW203.00.001
Chipset	GX6605S
Software version	1820
Headline feature	New Zoom Signal (S, Q & B) with big digits
Publisher-listed features	PTV Sports HD, TikTok, YouTube, weather, DLNA, E-Cast, multiple IPTV apps (including Xtream and Vida)
Published / updated	November 2, 2026 (publisher listing)
Source type	Customized third-party build — not an official StarSat release

A related earlier build in the same GX6605S HW203 family, ME260720-STARSAT application version VH24579, is dated July 20, 2026. Do not mix the two: check the hardware version on your own box (HW203.00.001) and in its System Information menu before flashing v1820. A build for a different hardware revision can brick the receiver, and a customized build carries extra risk versus an official release — keep a backup of your original software if possible.

Illustration only: the Zoom Signal display uses big digits for signal, quality and BER-style readouts; no measured values are claimed here.

Current Latest Versions: Other Popular Models

These are the latest versions shown in current model guides — they are not releases dated today, November 2. They are included so readers can check whether their box is already on the newest known build.

Model	Latest version listed	Notes
StarSat SR-5020HD	V3.83_14042026	Guide's latest; V3.80 (04032026) is described as the balanced, reliable alternative if V3.83 proves unstable on your box.
StarSat SR-2000HD Hyper	V2.86, dated April 15, 2026	File SR-2000HD HYBER-V2.86_15042026.bin; guide notes a fix for no-sound issues on some scrambled channels.
StarSat SR-X1 Extreme	V3.5.4, dated June 17, 2026	Large combined satellite + Android update, about 659 MB. Do not confuse it with a small .bin update.
MediaStar MS-R30 Mini	Ver3.30 (Black Menu and Agate Menu)	Files dated November 8, 2024; the guide page was published October 22, 2026. Not a new release. Warning from the guide: MS-R30 Mini, MS-M30 Mini and MS-MINI3030 are different models — the wrong file can brick the box.

Geant, Tiger and the Mirrors: No New Official Release Today

No new official Geant release was confirmed in today's check. DishDL, a third-party mirror rather than an official source, continues to list Geant models including the GN-OTT 500, GN-2500HD Plus, GN-9090 HD and GN-OTT 750 4K, but no new version or date for those models was confirmed today, so none is claimed here. The same mirror's editor picks were still the Tiger T66 FOREVER V1, Red Tiger T22 FOREVER and Red Tiger T22 VIP uploads dated October 23, 2026 in the latest crawl. Mirror uploads are not official releases: always prefer the manufacturer's own center where one exists, and verify the file name and size before flashing.

For context, StarSat's official V3.95 batch (28 files, added October 27, 2026 on swdw.net) was last verified on November 1 at 6,883 listed downloads across its 20 most-downloaded files, led by SR-2022HD MultSW at 796. That figure was not re-counted today, so no day-seven total is stated in this article.

Safe-Flash Checklist (Before You Update)

1. Match the exact model AND hardware version. For v1820 that means StarSat U43 S2 with HW203.00.001. Check the sticker and the System Information menu.
2. Know the source type. v1820 is a customized build, not an official StarSat release. If you only trust official files, wait for an official build for your model.
3. Back up first. Keep a copy of your original software and note your current version before flashing, so recovery is possible.
4. Use a clean, FAT32 USB drive with only the firmware file on it, and do not switch the receiver off during the flash. A power cut mid-flash is the most common cause of a dead box.
5. Check the file after download. A file far smaller or larger than expected is the wrong file or a bad download — delete it and re-download.
6. Do not expect a changelog for customized builds. Feature claims come from the publisher's listing; verify the features that matter to you after flashing, before relying on them.

The safe setup: receiver, remote, and a clean USB drive — and the exact file for your exact model and hardware version.

Frequently Asked Questions

Is there a new firmware release today, November 2, 2026?

Yes, one new build: StarSat U43 S2 version 1820 (GX6605S, HW203.00.001) with the Zoom Signal display, published November 2, 2026 by MAST Dish Info Layyah. It is a customized build, not an official StarSat release.

Can I install v1820 on any StarSat box?

No. It is listed only for the U43 S2 with hardware HW203.00.001. Installing it on a different model or hardware revision risks bricking the receiver.

What is the latest StarSat SR-5020HD software?

V3.83_14042026 is the latest version in the current model guide, with V3.80_04032026 as the steadier alternative if V3.83 is unstable on your box.

Is there a new MediaStar or Geant release today?

No new official MediaStar or Geant release was confirmed today. The MediaStar MS-R30 Mini Ver3.30 files date from November 2024, and no new Geant version or date was confirmed.

Should I update if my receiver works fine?

If your box is stable, there is no urgency — especially for a customized build. Update only if you need the Zoom Signal display or another listed feature, and only after matching your exact model and hardware version.

📚 Related Posts

• 1BissKey New Look October 2026: Receiver Zone Redesigned
• StarSat V3.95 Day 6: Top 20 Files Reach 6,883 Downloads
• StarSat V3.95 Day 5: Top 20 Files Cross 5,846 Downloads
• StarSat V3.95 Day 4: Top 20 Files Reach 4,927 Downloads
• StarSat V3.95 Day 3: Top 20 Files Hit 4,044 Downloads
• StarSat V3.95 Day 2: 3,138 Downloads, New Leader Emerges
• StarSat V2.34 Crosses 1,500 Downloads on Day 3: Full Report
• StarSat V2.34 Is Here: 5 New Files End 9 Quiet Days

Sources

• MAST Dish Info Layyah — StarSat U43 S2 HW203.00.001 Zoom Signal software v1820, published/updated November 2, 2026: https://mastdishinfolayyah.com/
• Real4Web — StarSat SR-5020HD software update 2026 guide (V3.83 latest, V3.80 stable alternative): https://real4web.com/en/starsat-sr-5020hd-software-update-2026/
• DWDVB — StarSat SR-2000HD Hyper latest software (V2.86, April 15, 2026): https://dwdvb.com/starsat-sr-2000hd-hyper-latest-software-2022/
• DWDVB — StarSat SR-X1 Extreme V3.5.4 firmware (June 17, 2026): https://dwdvb.com/starsat-sr-x1-extreme-v3-5-4/
• DWDVB — MediaStar MS-R30 Mini software page (Ver3.30 files dated November 8, 2024; page published October 22, 2026): https://dwdvb.com/mediastar-ms-m30-mini/
• DishDL (third-party mirror, context only) — Geant model listings including GN-OTT 500: https://dishdl.com/geant-gn-ott-500-receiver-software-update/giant-gn-ott-500/

Note: publisher-listed features for customized builds are the publisher's claims, not official StarSat specifications. Always verify the file for your exact receiver model and hardware version before flashing.

Disclaimer: 1BissKey reports publicly listed firmware information for information only. It does not host firmware files, and it is not affiliated with StarSat, Geant or MediaStar. Flashing firmware is done at your own risk; back up your settings first.